battletank/BaseMake.mk

# This Makefile includes the Arduino core sources. (Set ARDDIR here:)
ARDDIR 				= ./arduino

### These macros pertain to compiler flags
# Target file name (without extension).
ifndef TARGET
TARGET = main
endif
# List any extra directories to look for include files here.
ifndef EXTRAINCDIRS
EXTRAINCDIRS = 
endif
ifndef LDFLAGS
LDFLAGS = 
endif
ifndef CFLAGS
CFLAGS = 
endif


### These macros pertain to hardware settings
ifndef MCU
MCU = atmega328p
endif
ifndef F_CPU
F_CPU = 16000000
endif

CFLAGS += -D F_CPU=$(F_CPU) -D ARDUINO -D ROLE=$(ROLE)

ARDLIBS2 = SPI
### These macros pertain to supporting Arduino libs
ifndef NO_ARDUINO
	LDFLAGS += -lm # -lm = math library

	ARDLIBDIR 		= $(ARDDIR)/libraries
	ARDLIBDIR2 		= $(ARDDIR)/hardware/arduino/avr/libraries

	ARDCOREDIR 		= $(ARDDIR)/hardware/arduino/avr/cores/arduino

	ifeq ($(MCU),atmega328p)
	EXTRAINCDIRS += $(ARDDIR)/hardware/arduino/variants/standard
	endif

	ifeq ($(MCU),atmega2560)
	EXTRAINCDIRS += $(ARDDIR)/hardware/arduino/variants/mega
	endif

	ifeq ($(MCU),attiny85)
	EXTRAINCDIRS += $(ARDDIR)/hardware/attiny/variants/tiny8
	endif

	# add Arduino sources and include directories to PSRC and EXTRAINCDIRS

	SRC += $(wildcard $(ARDCOREDIR)/*.c)
	EXTRAINCDIRS += $(ARDCOREDIR)

	PSRC += $(wildcard $(ARDCOREDIR)/*.cpp)
	PSRC += $(foreach lib,$(ARDLIBS),$(ARDLIBDIR)/$(lib)/$(lib).cpp)
	PSRC += $(foreach lib,$(ARDLIBS2),$(ARDLIBDIR2)/$(lib)/src/$(lib).cpp)
	EXTRAINCDIRS += $(foreach lib,$(ARDLIBS),$(ARDLIBDIR)/$(lib))
endif


############# Don't need to change below here for most purposes  (Elliot)

# Optimization level, can be [0, 1, 2, 3, s]. 0 turns off optimization.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
OPT = s

# Output format. (can be srec, ihex, binary)
FORMAT = ihex

# List Assembler source files here.
# Make them always end in a capital .S.  Files ending in a lowercase .s
# will not be considered source files but generated files (assembler
# output from the compiler), and will be deleted upon "make clean"!
# Even though the DOS/Win* filesystem matches both .s and .S the same,
# it will preserve the spelling of the filenames, and gcc itself does
# care about how the name is spelled on its command-line.
ASRC =

# Optional compiler flags.
#  -g:        generate debugging information (for GDB, or for COFF conversion)
#  -O*:       optimization level
#  -f...:     tuning, see gcc manual and avr-libc documentation
#  -Wall...:  warning level
#  -Wa,...:   tell GCC to pass this to the assembler.
#    -ahlms:  create assembler listing
CFLAGS += -g -O$(OPT) \
-funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums \
-Wall -DBAUD=9600UL \
$(patsubst %,-I%,$(EXTRAINCDIRS))

# Optional assembler flags.
#  -Wa,...:   tell GCC to pass this to the assembler.
#  -ahlms:    create listing
#  -gstabs:   have the assembler create line number information; note that
#             for use in COFF files, additional information about filenames
#             and function names needs to be present in the assembler source
#             files -- see avr-libc docs [FIXME: not yet described there]
ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs 

# Optional linker flags.
#  -Wl,...:   tell GCC to pass this to linker.
#  -Map:      create map file
#  --cref:    add cross reference to  map file
LDFLAGS += -Wl,-Map=$(TARGET).map,--cref

# ---------------------------------------------------------------------------

# Define directories, if needed.
DIRAVR = c:/winavr
DIRAVRBIN = $(DIRAVR)/bin
DIRAVRUTILS = $(DIRAVR)/utils/bin
DIRINC = .
DIRLIB = $(DIRAVR)/avr/lib


# Define programs and commands.
SHELL = sh

CC = avr-gcc

OBJCOPY = avr-objcopy
OBJDUMP = avr-objdump
SIZE = avr-size

# Programming support using avrdude.
AVRDUDE = avrdude

REMOVE = rm -f
COPY = cp

HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
ELFSIZE = $(SIZE) -A $(TARGET).elf

# Define Messages
# English
MSG_ERRORS_NONE = Errors: none
MSG_BEGIN = -------- begin --------
MSG_END = --------  end  --------
MSG_SIZE_BEFORE = Size before: 
MSG_SIZE_AFTER = Size after:
MSG_COFF = Converting to AVR COFF:
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
MSG_FLASH = Creating load file for Flash:
MSG_EEPROM = Creating load file for EEPROM:
MSG_EXTENDED_LISTING = Creating Extended Listing:
MSG_SYMBOL_TABLE = Creating Symbol Table:
MSG_LINKING = Linking:
MSG_COMPILING = Compiling:
MSG_ASSEMBLING = Assembling:
MSG_CLEANING = Cleaning project:

# Define all object files.
OBJ = $(SRC:.c=.o) $(ASRC:.S=.o) $(PSRC:.cpp=.o)

# Define all listing files.
LST = $(ASRC:.S=.lst) $(SRC:.c=.lst) $(PSRC:.cpp=.lst)

# Combine all necessary flags and optional flags.
# Add target processor to flags.
ALL_CFLAGS 		= -mmcu=$(MCU) -I. $(CFLAGS) -Wa,-adhlns=$(<:.c=.lst)
ALL_CXXFLAGS 	= -mmcu=$(MCU) -I. $(CFLAGS) -Wa,-adhlns=$(<:.cpp=.lst)
ALL_ASFLAGS 	= -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)


# Default target: make program!
all: begin gccversion sizebefore \
	$(TARGET).elf $(TARGET).hex $(TARGET).eep $(TARGET).lss $(TARGET).sym \
	sizeafter finished end

# Eye candy.
# AVR Studio 3.x does not check make's exit code but relies on
# the following magic strings to be generated by the compile job.
begin:
	@echo
	@echo $(MSG_BEGIN)

finished:
	@echo $(MSG_ERRORS_NONE)

end:
	@echo $(MSG_END)
	@echo


# Display size of file.
sizebefore:
	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi

sizeafter:
	@if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi

# Display compiler version information.
gccversion : 
	@$(CC) --version
	@echo 
	@echo $(OBJ)


# Create final output files (.hex, .eep) from ELF output file.
%.hex: %.elf
	@echo
	@echo $(MSG_FLASH) $@
	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@

%.eep: %.elf
	@echo
	@echo $(MSG_EEPROM) $@
	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@

# Create extended listing file from ELF output file.
%.lss: %.elf
	@echo
	@echo $(MSG_EXTENDED_LISTING) $@
	$(OBJDUMP) -h -S $< > $@

# Create a symbol table from ELF output file.
%.sym: %.elf
	@echo
	@echo $(MSG_SYMBOL_TABLE) $@
	avr-nm -n $< > $@



# Link: create ELF output file from object files.
.SECONDARY: $(TARGET).elf
.PRECIOUS: $(OBJ)
%.elf: $(OBJ)
	@echo
	@echo $(MSG_LINKING) $@
	$(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS)


# Compile: create object files from C source files.
%.o: %.c
	@echo
	@echo $(MSG_COMPILING) $<
	$(CC) -c $(ALL_CFLAGS) $< -o $@


# Compile: create assembler files from C source files.
%.s: %.c
	$(CC) -S $(ALL_CFLAGS) $< -o $@


# Compile: create object files from C++ source files
%.o: %.cpp
	@echo
	@echo $(MSG_COMPILING) $<
	$(CC) -c $(ALL_CXXFLAGS) $< -o $@

# Compile: create assembler files from C source files.
%.s: %.cpp
	$(CC) -S $(ALL_CXXFLAGS) $< -o $@


# Assemble: create object files from assembler source files.
%.o: %.S
	@echo
	@echo $(MSG_ASSEMBLING) $<
	$(CC) -c $(ALL_ASFLAGS) $< -o $@


# Target: clean project.
clean: begin clean_list finished end

clean_list :
	@echo
	@echo $(MSG_CLEANING)
	$(REMOVE) $(TARGET).hex
	$(REMOVE) $(TARGET).eep
	$(REMOVE) $(TARGET).obj
	$(REMOVE) $(TARGET).cof
	$(REMOVE) $(TARGET).elf
	$(REMOVE) $(TARGET).map
	$(REMOVE) $(TARGET).obj
	$(REMOVE) $(TARGET).a90
	$(REMOVE) $(TARGET).sym
	$(REMOVE) $(TARGET).lnk
	$(REMOVE) $(TARGET).lss
	$(REMOVE) $(TARGET).lst
	$(REMOVE) $(OBJ)
	$(REMOVE) $(LST)
	$(REMOVE) $(SRC:.c=.s)
	$(REMOVE) $(SRC:.c=.d)
	$(REMOVE) $(PSRC:.cpp=.s)
	$(REMOVE) $(PSRC:.cpp=.d)
	$(REMOVE) *~


# Automatically generate C source code dependencies. 
# (Code originally taken from the GNU make user manual and modified 
# (See README.txt Credits).)
#
# Note that this will work with sh (bash) and sed that is shipped with WinAVR
# (see the SHELL variable defined above).
# This may not work with other shells or other seds.

%.d: %.c
	set -e; $(CC) -MM $(ALL_CFLAGS) $< \
	| sed 's,\(.*\)\.o[ :]*,\1.o \1.d : ,g' > $@; \
	[ -s $@ ] || rm -f $@

%.d: %.cpp
	set -e; $(CC) -MM $(ALL_CFLAGS) $< \
	| sed 's,\(.*\)\.o[ :]*,\1.o \1.d : ,g' > $@; \
	[ -s $@ ] || rm -f $@

# Remove the '-' if you want to see the dependency files generated.
include $(SRC:.c=.d)

-include $(PSRC:.cpp=.d)

# Listing of phony targets.
.PHONY : all begin finish end sizebefore sizeafter gccversion coff extcoff \
	clean clean_list program