You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
241 lines
8.8 KiB
241 lines
8.8 KiB
/*==============================================================================
|
|
* WIFI CONFIGURATION
|
|
*
|
|
* You must configure your particular hardware. Follow the steps below.
|
|
*
|
|
* By default, StandardFirmataWiFi is configured as a TCP server, to configure
|
|
* as a TCP client, see STEP 2.
|
|
*============================================================================*/
|
|
|
|
// STEP 1 [REQUIRED]
|
|
// Uncomment / comment the appropriate set of includes for your hardware (OPTION A, B or C)
|
|
// Arduino MKR1000 or ESP8266 are enabled by default if compiling for either of those boards.
|
|
|
|
/*
|
|
* OPTION A: Configure for Arduino MKR1000 or Arduino WiFi Shield 101
|
|
*
|
|
* This will configure StandardFirmataWiFi to use the WiFi101 library, which works with the
|
|
* Arduino WiFi101 shield and devices that have the WiFi101 chip built in (such as the MKR1000).
|
|
* It is compatible with 802.11 B/G/N networks.
|
|
*
|
|
* If you are using the MKR1000 board, continue on to STEP 2. If you are using the WiFi 101 shield,
|
|
* follow the instructions below.
|
|
*
|
|
* To enable for the WiFi 101 shield, uncomment the #define WIFI_101 below and verify the
|
|
* #define ARDUINO_WIFI_SHIELD is commented out for OPTION B.
|
|
*
|
|
* IMPORTANT: You must have the WiFI 101 library installed. To easily install this library, open
|
|
* the library manager via: Arduino IDE Menus: Sketch > Include Library > Manage Libraries > filter
|
|
* search for "WiFi101" > Select the result and click 'install'
|
|
*/
|
|
//#define WIFI_101
|
|
|
|
//do not modify the following 11 lines
|
|
#if defined(ARDUINO_SAMD_MKR1000) && !defined(WIFI_101)
|
|
// automatically include if compiling for MRK1000
|
|
#define WIFI_101
|
|
#endif
|
|
#ifdef WIFI_101
|
|
#include <WiFi101.h>
|
|
#include "utility/WiFiClientStream.h"
|
|
#include "utility/WiFiServerStream.h"
|
|
#define WIFI_LIB_INCLUDED
|
|
#endif
|
|
|
|
/*
|
|
* OPTION B: Configure for legacy Arduino WiFi shield
|
|
*
|
|
* This will configure StandardFirmataWiFi to use the original WiFi library (deprecated) provided
|
|
* with the Arduino IDE. It is supported by the Arduino WiFi shield (a discontinued product) and
|
|
* is compatible with 802.11 B/G networks.
|
|
*
|
|
* To configure StandardFirmataWiFi to use the legacy Arduino WiFi shield
|
|
* leave the #define below uncommented and ensure #define WIFI_101 is commented out for OPTION A.
|
|
*/
|
|
//#define ARDUINO_WIFI_SHIELD
|
|
|
|
//do not modify the following 10 lines
|
|
#ifdef ARDUINO_WIFI_SHIELD
|
|
#include <WiFi.h>
|
|
#include "utility/WiFiClientStream.h"
|
|
#include "utility/WiFiServerStream.h"
|
|
#ifdef WIFI_LIB_INCLUDED
|
|
#define MULTIPLE_WIFI_LIB_INCLUDES
|
|
#else
|
|
#define WIFI_LIB_INCLUDED
|
|
#endif
|
|
#endif
|
|
|
|
/*
|
|
* OPTION C: Configure for ESP8266
|
|
*
|
|
* This will configure StandardFirmataWiFi to use the ESP8266WiFi library for boards
|
|
* with an ESP8266 chip. It is compatible with 802.11 B/G/N networks.
|
|
*
|
|
* The appropriate libraries are included automatically when compiling for the ESP8266 so
|
|
* continue on to STEP 2.
|
|
*
|
|
* IMPORTANT: You must have the esp8266 board support installed. To easily install this board see
|
|
* the instructions here: https://github.com/esp8266/Arduino#installing-with-boards-manager.
|
|
*/
|
|
//do not modify the following 14 lines
|
|
#ifdef ESP8266
|
|
// automatically include if compiling for ESP8266
|
|
#define ESP8266_WIFI
|
|
#endif
|
|
#ifdef ESP8266_WIFI
|
|
#include <ESP8266WiFi.h>
|
|
#include "utility/WiFiClientStream.h"
|
|
#include "utility/WiFiServerStream.h"
|
|
#ifdef WIFI_LIB_INCLUDED
|
|
#define MULTIPLE_WIFI_LIB_INCLUDES
|
|
#else
|
|
#define WIFI_LIB_INCLUDED
|
|
#endif
|
|
#endif
|
|
|
|
/*
|
|
* OPTION D: Configure for HUZZAH
|
|
*
|
|
* HUZZAH with CC3000 is not yet supported, this will be added in a later revision to
|
|
* StandardFirmataWiFi.
|
|
* For HUZZAH with ESP8266 use ESP8266_WIFI.
|
|
*/
|
|
|
|
//------------------------------
|
|
// TODO
|
|
//------------------------------
|
|
//#define HUZZAH_WIFI
|
|
|
|
|
|
// STEP 2 [OPTIONAL for all boards and shields]
|
|
// If you want to setup you board as a TCP client, uncomment the following define and replace
|
|
// the IP address with the IP address of your server.
|
|
//#define SERVER_IP 10, 0, 0, 15
|
|
|
|
|
|
// STEP 3 [REQUIRED for all boards and shields]
|
|
// replace this with your wireless network SSID
|
|
char ssid[] = "your_network_name";
|
|
|
|
|
|
// STEP 4 [OPTIONAL for all boards and shields]
|
|
// If you want to use a static IP (v4) address, uncomment the line below. You can also change the IP.
|
|
// If the first line is commented out, the WiFi shield will attempt to get an IP from the DHCP server.
|
|
// If you are using a static IP with the ESP8266 then you must also uncomment the SUBNET and GATEWAY.
|
|
//#define STATIC_IP_ADDRESS 192,168,1,113
|
|
//#define SUBNET_MASK 255,255,255,0 // REQUIRED for ESP8266_WIFI, optional for others
|
|
//#define GATEWAY_IP_ADDRESS 0,0,0,0 // REQUIRED for ESP8266_WIFI, optional for others
|
|
|
|
|
|
// STEP 5 [REQUIRED for all boards and shields]
|
|
// define your port number here, you will need this to open a TCP connection to your Arduino
|
|
#define SERVER_PORT 3030
|
|
|
|
|
|
// STEP 6 [REQUIRED for all boards and shields]
|
|
// determine your network security type (OPTION A, B, or C). Option A is the most common, and the
|
|
// default.
|
|
|
|
/*
|
|
* OPTION A: WPA / WPA2
|
|
*
|
|
* WPA is the most common network security type. A passphrase is required to connect to this type.
|
|
*
|
|
* To enable, leave #define WIFI_WPA_SECURITY uncommented below, set your wpa_passphrase value
|
|
* appropriately, and do not uncomment the #define values under options B and C
|
|
*/
|
|
#define WIFI_WPA_SECURITY
|
|
|
|
#ifdef WIFI_WPA_SECURITY
|
|
char wpa_passphrase[] = "your_wpa_passphrase";
|
|
#endif //WIFI_WPA_SECURITY
|
|
|
|
|
|
/*
|
|
* OPTION B: WEP
|
|
*
|
|
* WEP is a less common (and regarded as less safe) security type. A WEP key and its associated
|
|
* index are required to connect to this type.
|
|
*
|
|
* To enable, Uncomment the #define below, set your wep_index and wep_key values appropriately,
|
|
* and verify the #define values under options A and C are commented out.
|
|
*/
|
|
//#define WIFI_WEP_SECURITY
|
|
|
|
#ifdef WIFI_WEP_SECURITY
|
|
//The wep_index below is a zero-indexed value.
|
|
//Valid indices are [0-3], even if your router/gateway numbers your keys [1-4].
|
|
byte wep_index = 0;
|
|
char wep_key[] = "your_wep_key";
|
|
#endif //WIFI_WEP_SECURITY
|
|
|
|
|
|
/*
|
|
* OPTION C: Open network (no security)
|
|
*
|
|
* Open networks have no security, can be connected to by any device that knows the ssid, and are
|
|
* unsafe.
|
|
*
|
|
* To enable, uncomment #define WIFI_NO_SECURITY below and verify the #define values
|
|
* under options A and B are commented out.
|
|
*/
|
|
//#define WIFI_NO_SECURITY
|
|
|
|
/*==============================================================================
|
|
* CONFIGURATION ERROR CHECK (don't change anything here)
|
|
*============================================================================*/
|
|
|
|
#ifdef MULTIPLE_WIFI_LIB_INCLUDES
|
|
#error "you may not define more than one wifi device type in wifiConfig.h."
|
|
#endif
|
|
|
|
#ifndef WIFI_LIB_INCLUDED
|
|
#error "you must define a wifi device type in wifiConfig.h."
|
|
#endif
|
|
|
|
#if ((defined(WIFI_NO_SECURITY) && (defined(WIFI_WEP_SECURITY) || defined(WIFI_WPA_SECURITY))) || (defined(WIFI_WEP_SECURITY) && defined(WIFI_WPA_SECURITY)))
|
|
#error "you may not define more than one security type at the same time in wifiConfig.h."
|
|
#endif //WIFI_* security define check
|
|
|
|
#if !(defined(WIFI_NO_SECURITY) || defined(WIFI_WEP_SECURITY) || defined(WIFI_WPA_SECURITY))
|
|
#error "you must define a wifi security type in wifiConfig.h."
|
|
#endif //WIFI_* security define check
|
|
|
|
#if (defined(ESP8266_WIFI) && !(defined(WIFI_NO_SECURITY) || (defined(WIFI_WPA_SECURITY))))
|
|
#error "you must choose between WIFI_NO_SECURITY and WIFI_WPA_SECURITY"
|
|
#endif
|
|
|
|
/*==============================================================================
|
|
* WIFI STREAM (don't change anything here)
|
|
*============================================================================*/
|
|
|
|
#ifdef SERVER_IP
|
|
WiFiClientStream stream(IPAddress(SERVER_IP), SERVER_PORT);
|
|
#else
|
|
WiFiServerStream stream(SERVER_PORT);
|
|
#endif
|
|
|
|
/*==============================================================================
|
|
* PIN IGNORE MACROS (don't change anything here)
|
|
*============================================================================*/
|
|
|
|
#if defined(WIFI_101) && !defined(ARDUINO_SAMD_MKR1000)
|
|
// ignore SPI pins, pin 5 (reset WiFi101 shield), pin 7 (WiFi handshake) and pin 10 (WiFi SS)
|
|
// also don't ignore SS pin if it's not pin 10. Not needed for Arduino MKR1000.
|
|
#define IS_IGNORE_PIN(p) ((p) == 10 || (IS_PIN_SPI(p) && (p) != SS) || (p) == 5 || (p) == 7)
|
|
|
|
#elif defined(ARDUINO_WIFI_SHIELD) && defined(__AVR_ATmega32U4__)
|
|
// ignore SPI pins, pin 4 (SS for SD-Card on WiFi-shield), pin 7 (WiFi handshake) and pin 10 (WiFi SS)
|
|
// On Leonardo, pin 24 maps to D4 and pin 28 maps to D10
|
|
#define IS_IGNORE_PIN(p) ((IS_PIN_SPI(p) || (p) == 4) || (p) == 7 || (p) == 10 || (p) == 24 || (p) == 28)
|
|
|
|
#elif defined(ARDUINO_WIFI_SHIELD)
|
|
// ignore SPI pins, pin 4 (SS for SD-Card on WiFi-shield), pin 7 (WiFi handshake) and pin 10 (WiFi SS)
|
|
#define IS_IGNORE_PIN(p) ((IS_PIN_SPI(p) || (p) == 4) || (p) == 7 || (p) == 10)
|
|
|
|
#elif defined(ESP8266_WIFI) && defined(SERIAL_DEBUG)
|
|
#define IS_IGNORE_PIN(p) ((p) == 1)
|
|
|
|
#endif
|